RH850/F1Kx, RH850/F1K Series Hardware Design Guide
R01AN3841ED0110 Rev. 1.10 Page 26 of 108
August 8, 2019
Table 22: RH850/F1KM-S4 Power supply architecture with mixed supply 5V & 3.3V
Case 14 – Mixed Supply 5V & 3.3V
EVCC = 3.3V
BVCC = 3.3V
A0VREF = 3.3V
A1VREF = 5V
AP0 – Port usable with analog or digital function
P8 – Port usable with analog or digital function
P9 – Port usable with analog or digital function
AP1 – Port usable with analog or digital function
P18 – Port usable with analog or digital function, analog input
voltage limited to max. 3.3V, reduced AD conversion range between 0V
to 3.3V
P19 – Port usable with analog or digital function, analog input
voltage limited to max. 3.3V, reduced AD conversion range between 0V
to 3.3V
Analog port function limitation applies to P18 and P19
Table 23: RH850/F1KM-S4 Power supply architecture with single supply 3.3V
Case 15 – Single Supply 3.3V
EVCC = 3.3V
BVCC = 3.3V
A0VREF = 3.3V
AP0 – Port usable with analog or digital function
P8 – Port usable with analog or digital function
P9 – Port usable with analog or digital function
AP1 – Port usable with analog or digital function
P18 – Port usable with analog or digital function
3FFh
0V
3.3V
5V
2A3h
0V
3.3V
5V
Note: Con ver sion r ange ex ampl e base d on 10-bit ADC resolution
Analog input channel on AP1
Analog input channel on P18 and P19
Red uced AD c onversion range
Available
voltage range
Available
voltage range