RFL 9660 RFL Electronics Inc.
August 18, 1998 7-4 (973) 334-3100
Table 7-2 Long-form responses and short-form equivalents - continued.
Verbose ASCII (“F” Command)
(1)
Short-Form Response
(“B” Command)
(2)
Fiber optic master absent FM
Invalid password BP
Local disconnect button pressed PR
Logged on as number [user number] P#
Long response format LR
Number of ports [number of ports] #P
Old label was [old label] OL
Parameters are [parameters] DP
Passed PA
Please enter new label, up to [number of characters] LP
Please enter password PW
Port number [number of selected port] P#
Port number must be 1 - [highest port number; 8, 16, 24, or 32] PE
Remote disconnect active RD
Request for service from port UR
Reset in progress ... RM
ROM checksum RS
ROM IS [ ] R#
Site ID [site identification] SN
Software version 1.1.7 VA
Static RAM SR
Static RAM size is [number of bytes] SS
The fiber optic loop is operating FL
NOTES:
1. Information within brackets describes the information that will appear as part of the long-form response.
2. A number sign (“#”) in a short-form response indicates a wild-card character; it can be replaced with any number.
To Next Page