RFL 9660 RFL Electronics Inc.
April 24, 2007 15-1 (973) 334-3100
A
Aborting a command, 4-30
Ac/alarm I/O module
component locator drawing, 14-42
fuse replacement, 10-3
parts list, 14-41
schematic, 14-43
Accessing the RFL 9660
as a super-user, 5-1
general information, 1-5
locally, 1-4, 3-4, 4-25
remotely using Windows Terminal Emulator, 1-4, 4-18
using a DOS-based terminal emulator, 4-22
Adding callback strings to passwords, 3-11
Alarm connections, 2-4
Alarm relays, 1-7
Application notes, 1-2, 16-1
Applications
using Microsoft Windows to load and run, 4-1
Assignments, port, 12-1
Asynchronous local port, 1-6
C
Callback strings, adding to passwords, 3-11
Callout functions, setting, 3-19
Changes, saving, 5-21
Changing information on a specific port, 3-14, 5-4
Codes, status and error, 6-1
Command language, 7-1
Command result codes, 13-35
Commands
aborting, 4-30
configuration, 5-12
general access, 4-28
modem, 13-2
super-user, 5-1
Common configuration setup strings, 13-41
Communication parameters, setting the, 3-16
Component locator drawings
ac/alarm I/O module, 14-42
CPU module, 14-6
direct digital I/O module, 14-18
fiber optic master I/O module, 14-53
fiber optic remote module transceiver board, 14-63
modem I/O module, 14-15
modem module, 14-12
motherboard, 14-58
power supply module, ac-input, 14-33
power supply module, dc-input, 14-25
power/alarm I/O module, 14-38
RS-232 device port module, 14-46
Configuration commands, 5-12
Configuration, update hardware, 5-22
Connecting the local and modem ports, 4-34
Connections, 2-2
alarm, 2-4
alarm, remote disconnect, and power, 2-5, 2-6
direct digital interface, 2-9
fiber optic master and remotes, 2-11
ground, 2-4
local terminal, 3-1
power, 2-4
Section 15. INDEX
remote disconnect, 2-4
RS-232 port, 2-8
telephone, 2-7
to digital interface, 2-9
to terminal blocks, 2-2
Construction details, local terminal cable, 3-3
Control, port flow, setting, 3-17
Controls and indicators, 3-1
CPU module
component locator drawing, 14-6
jumper and switch settings, 8-1
parts list, 14-3
schematic, 14-7
D
Deselecting a port, 4-33
Device modems, 1-2
Device port modules, 1-3
Device port configuration, 1-4
Device ports, 1-6
Diagnostics
description, 1-5
running internal, 10-7
Dimensions, mounting, 2-3
Direct digital I/O module
component locator drawing, 14-18
connections to, 2-9
parts list, 14-17
schematic, 14-19
DIP switch settings, 8-1
Disconnect, remote, 2-5
Displaying port information, 4-30
Display command list, 4-30
DOC regulations, 11-2
E
Emergency interrupt signaling, 1-5
Emulation setup, terminal, 4-3
Ending a session, 4-32
Entering the port configuration mode, 3-14
Equipment overview, 1-1
Error codes, 6-1
Expansion, system, 2-13
F
FCC regulations, 11-1
Fiber optic master I/O module, 9-1
component locator drawing, 14-53
connections to, 2-11
parts list, 14-51
schematic, 14-55
switch settings, 9-2
Fiber optic remote module
connections to, 2-11
switch settings, 9-3
component locator drawing, power supply board, 14-68
component locator drawing, transceiver board, 14-63
To Next Page
Loading...