RFL Electronics RFL 9660 - Typical List of Current Selections with Passwords and Callback Strings Entered

# Password Use Callback String
1 GIANTS 0 \HATDT5550101\N\D\4
2 BILLS 0 \HATDT5550202\N\D\4
3 PATRIOT 0 \HATDT5550303\N\D\4
4 EAGLES 0 \HATDT5550404\N\D\4
5 STEELER 0 \HATDT5550505\N\D\4
6 BROWNS 0 \HATDT5550606\N\D\4
7 DOLPHIN 0 \HATDT5550707\N\D\4
8 FALCONS 0 \HATDT5550808\N\D\4
9 LIONS 0 \HATDT5550909\N\D\4
10 REDSKIN 0 \HATDT5551010\N\D\4
PP 28 sec
PA 1 sec
PB 1 sec
PT 600 sec
PM 600 sec
CR \,+++\,ATZ0 0\n\,
CC BYE
CM Long CE N
CA Y CT N
CONFIG> _
Figure 3-7. Typical list of current selections with passwords and callback strings entered
6. Answer "yes" by pressing the [Y] and [ENTER] keys. The following message will appear:
Please wait.............
Periods will be added to the line as the callback strings are being stored. When storage is complete, the
"CONFIG>" prompt will reappear.
7. Exit the configuration mode by pressing the [Q] and [ENTER] keys.
The "CONFIG>" prompt will change back to the "LOCAL>" prompt. This shows that the
RFL 9660 has left the configuration mode. At this point, the callback strings have now
been set.
RFL 9660 RFL Electronics Inc.
October 1, 1999 3-13 (973) 334-3100