RFL Electronics RFL 9660 - Page 177

RFL 9660 RFL Electronics Inc.
April 24, 2007 13-24 (973) 334-3100
Command: #CBF? Callback Failed Attempts Display
Values:
N/A
Default:
N/A -
Description:
Requests the number of failed callback passwords since reset or power-up.
This number can be stored to nonvolatile memory using the &W command.
Command: #CBFR Callback Failed Attempts Reset
Values:
N/A
Default:
N/A
Description:
Resets the number of failed callback passwords to 0. This does not reset the
number stored in nonvolatile memory.
Command: #CBIn Local Callback Inactivity Timer
Values:
n = 1–255
Default:
20
Description:
Sets the time (in minutes) that the modem waits for a command before
forcing the user to enter the setup password again.
Command: #CBNy=x Store Callback Password
Values:
y = 0–29
x = password
Defaults:
None
Description:
Sets the callback security password for the y memory location. The password
must have 6 to 10 characters, and cannot include the + or - characters.
Command: #CBPn Callback Parity
Values:
n = 0, 1, or 2
Default:
0
Description:
Sets parity for the callback security messages.
#CBP0 No parity.
#CBP1 Odd parity.
#CBP2 Even parity.
Command: #CBRy Callback Security Reset
Values: y = 0–29
Default:
None
Description:
Clears the password and phone number in the y memory location.
Command: #CBSn Callback Enable/Disable
Values: n = 0, 1, 2, or 3
Default:
0
Description: #CBS0 Disables callback security.
#CBS1 Enables local and remote callback security.
#CBS2 Enables remote callback security only.
#CBS3 Disables callback security until local hang-up or reset.