RFL 9660 RFL Electronics Inc.
April 24, 2007 4-21 (973) 334-3100
13. Once the RFL 9660 has connected you to the device you want, double-click on the "Switch Application"
icon at the bottom of the "Program Manager" window.
The "Switch Applications" window will appear on the screen, on top of the "Terminal
Emulator" window. (Because the "Terminal Emulator" window is still displayed, the
terminal emulator is still active and the phone connection has not been broken.)
14. Click on the icon for the application program you want to run with the device you are connected to.
The application program will start running. (Refer to the documentation supplied with
the application program for information on how to use it.)
15. When you are finished, exit the application program.
Refer to the documentation supplied with the program for information on how to do
this.
16. Click on the "Minimize" button at the top right of the "Switch Applications" window.
The "Switch Applications" window will disappear, and its icon will reappear at the
bottom of the "Program Manager" window.
17. Type in the port deselect code ("BYE") to terminate the connection to the device.
Do not press the [ENTER] key. The RFL 9660 will return a "REMOTE>" prompt to your
display when the device port is deselected.
18. Repeat steps 11 through 17 if you want to connect to another device. If you are finished, you can
terminate the session by pressing the [Q] and [ENTER] keys, or by clicking on the "Phone"
menu name, and then clicking on "Hang Up" in the menu that appears.
The RFL 9660 will disconnect your terminal and end the session. The following
message will appear on your display:
User terminated this session!
The RFL 9660 will begin its hang-up sequence. When it is finished, the RFL 9660 will be
ready to start another session.
To Next Page
Loading...