System SP1-xxx
SM Appendix 3-9 D086/D087
Appendix:
SP Mode
Tables
printing.
004
Plain1:BW:Press *ENG
[100 to 200 / 120 / 1 deg/step]
Specifies the pressure roller target temperature for the ready condition in BW
printing.
005
Plain2:FC:Center *ENG
[120 to 200 / 160 / 1 deg/step]
Specifies the heating roller target temperature for the ready condition in full
color printing.
006
Plain2:FC:Press *ENG
[100 to 200 / 120 / 1 deg/step]
Specifies the pressure roller target temperature for the ready condition in full
coloe printing.
007
Plain2:BW:Center *ENG
[120 to 200 / 150 / 1 deg/step]
Specifies the heating roller target temperature for the ready condition in BW
printing.
008
Plain2:BW:Press *ENG
[100 to 200 / 120 / 1 deg/step]
Specifies the pressure roller target temperature for the ready condition in BW
printing.
009 Thin:FC:Center *ENG
[120 to 200 / 150 / 1 deg/step]
010 Thin:FC:Press *ENG
[100 to 200 / 120 / 1 deg/step]
011 Thin:BW:Center *ENG
[120 to 200 / 140 / 1 deg/step]
012 Thin:BW:Press *ENG
[100 to 200 / 120 / 1 deg/step]
013 M-thick:FC:Center *ENG
[120 to 200 / 165 / 1 deg/step]
014 M-thick:FC:Press *ENG
[100 to 200 / 120 / 1 deg/step]
015 M-thick:BW:Center *ENG
[120 to 200 / 155 / 1 deg/step]
016 M-thick:BW:Press *ENG
[100 to 200 / 120 / 1 deg/step]
017 Thick1:FC:Center *ENG
[120 to 200 / 155 / 1 deg/step]
018 Thick1:FC:Press *ENG
[100 to 200 / 120 / 1 deg/step]