Message Causes Solutions
"Paper size and type are
mismatched. Select another
tray from the following and
press [Continue]. To cancel
job, press [Job Reset].
Paper size and type can
also be changed in User
Tools."
The printer driver settings are
incorrect or the tray does not
contain paper of the size or
type selected in the printer
driver.
• Check that the printer driver
settings are correct, and then
load paper of the size selected
in the printer driver into the input
tray. For details about how to
change the paper size, see
"Changing the Paper Size",
Paper Specifications and Adding
Paper .
• Select the tray manually to
continue printing, or cancel a
print job. For details about how
to select the tray manually, or
cancel a print job, see "If an
Error Occurs with the Specified
Paper Size and Type", Print .
"Paper size of n is
mismatched. Select another
tray from the following and
press [Continue]. Paper
type can also be changed
in User Tools."
(A tray name is placed at
n.)
• The size of the paper in
the tray does not match
the paper size specified
in the printer driver.
•
You have printed on
small size paper from a
tray that is not specified
as the small size tray.
•
Select a tray containing paper
that is the same size as the
specified paper size.
• Change the setting for [Small
Size Paper Tray] in [System
Settings]. For details about
changing the setting for "Small
Size Paper Tray", see "General
Features", Connecting the
Machine/ System Settings
.
"Problem: Printer Font Error" An error has occurred in the
font settings.
Contact your service representative.
"Problems with the wireless
card. Please call service."
(A "wireless LAN board" or
"Bluetooth unit" is referred
to as a "wireless card".)
The machine has detected a
Bluetooth failure, or it could
not detect a Bluetooth unit. It
may be incorrectly installed.
Check that the Bluetooth unit is
installed properly, or contact your
service representative.
10. Troubleshooting
200
To Next Page
Loading...
Need help?
General
