To Next PageTo Next PageWhat to do if my Ricoh All in One Printer display is off?
The display might be off because the machine is in Low Power mode. To resolve this, touch the display panel or press any key on the control panel to exit Low Power mode. Alternatively, the machine might be in Sleep mode. Press the [Energy Saver] key or the [Check Status] key to exit Sleep mode.
Why documents and reports do not print out on my Ricoh All in One Printer?
This issue may occur if the paper output tray is full; in this case, remove the prints from the tray. Alternatively, it could be due to a lack of paper; if so, load paper into the printer.
What to do if error message remains on Ricoh All in One Printer?
To clear an error message on your Ricoh All in One Printer after removing misfed paper, open and close the cover as required. Also, check if paper is still jammed in the tray.
How to enable duplex printing on Ricoh All in One Printer?
If you cannot print in duplex mode with your Ricoh All in One Printer, it might be because you've selected a paper tray that isn't set for duplex printing. Change the setting for "Apply Duplex" in System Settings to enable duplex printing for the paper tray. Alternatively, you might have selected a paper type that cannot be used for duplex printing. In [Tray Paper Settings], select a paper type suitable for duplex printing.
Why does Ricoh All in One Printer print on the reverse side?
If your Ricoh All in One Printer prints original images on the reverse side of the paper, you might have loaded the paper incorrectly. Load paper into the paper tray or tray 3 (LCT) with the print side up. Load paper into the Large capacity tray (LCT), or bypass tray with the print side down.
Why does my Ricoh All in One Printer misfeed frequently?
If misfeeds occur frequently with your Ricoh All in One Printer, ensure the tray's side or end fences are set properly and locked. Also, do not place anything on the finisher tray. If you load a paper size that is not selected automatically, specify the paper size using the control panel. If misfeeds occur frequently when printing on sheets loaded in internal tray 2, raise the guide on internal tray 2, and then try printing the job again. If sheets are curled when they are output, raise the guide on internal tray 2.
What to do if documents do not print out on Ricoh All in One Printer?
If documents and reports from your Ricoh All in One Printer aren't printing, first, check if the paper output tray is full and remove any prints. Also, ensure that the printer has paper loaded. If it doesn't, load paper into the printer.
What to do if an error has occurred on Ricoh All in One Printer?
A function with the status "Error Occurred" in the [Check Status] screen is defective. Press [Check] in the function where the error occurred, then check the displayed message, and take appropriate action. You can use other functions normally.
What to do if an error message remains on Ricoh All in One Printer, even after misfed paper is removed?
If a misfeed message persists after removing the jammed paper, it could be because the cover needs to be opened and closed to reset the system. Open and close the cover. Alternatively, paper may still be jammed in the tray.
Why can't I print in duplex mode on my Ricoh All in One Printer?
You might not be able to print in duplex mode if you've selected a paper tray that isn't set for duplex printing. To fix this, change the setting for "Apply Duplex" in System Settings to enable duplex printing for the paper tray. Also, this can happen if you have selected a paper type that cannot be used for duplex printing. In [Tray Paper Settings], select a paper type that is suitable for duplex printing.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Max Print Resolution | 1200 x 1200 dpi |
| Copy Resolution | 600 x 600 dpi |
| Multiple Copy | Up to 999 copies |
| Max Paper Capacity | 4, 400 sheets |
| Duplex Printing | Yes |
| Hard Disk Drive | 250 GB |
| Power Consumption (Maximum) | 1.7 kW |
| Type | All in One Printer |
| Print Speed | 55 pages per minute |
| Copy Speed | 55 copies per minute |
| Zoom | 25% to 400% |
| Scan Resolution | 600 dpi |
| Fax Resolution | 200 x 200 dpi |
| Original Capacity | 100 sheets |
| Standard Paper Capacity | 1, 200 sheets |
| Memory | 1.5 GB RAM |
| Interface | USB 2.0, Ethernet |
| Network Protocols | TCP/IP |
| Operating Systems Supported | Windows, Mac, Linux |
| Power Source | AC 120V, 60Hz |
| Paper Weight | 52 – 256 g/m² |
