To Next PageTo Next PageWhat to do if misfeeds occur frequently on Ricoh All in One Printer?
Frequent misfeeds can occur if the tray's side or end fences are not set properly. Check that the side or end fences are correctly positioned and locked. Also, it can happen if paper of undetectable size has been loaded. If you load a paper size that is not selected automatically, you need to specify the paper size using the control panel.
General| Functions | Print, Copy, Scan, Fax |
|---|---|
| Print Technology | Laser |
| Max Print Resolution | 1200 x 1200 dpi |
| Copy Resolution | 600 x 600 dpi |
| Multiple Copy | Up to 999 copies |
| Max Paper Capacity | 4, 400 sheets |
| Duplex Printing | Yes |
| Hard Disk Drive | 250 GB |
| Power Consumption (Maximum) | 1.7 kW |
| Type | All in One Printer |
| Print Speed | 55 pages per minute |
| Copy Speed | 55 copies per minute |
| Zoom | 25% to 400% |
| Scan Resolution | 600 dpi |
| Fax Resolution | 200 x 200 dpi |
| Original Capacity | 100 sheets |
| Standard Paper Capacity | 1, 200 sheets |
| Memory | 1.5 GB RAM |
| Interface | USB 2.0, Ethernet |
| Network Protocols | TCP/IP |
| Operating Systems Supported | Windows, Mac, Linux |
| Power Source | AC 120V, 60Hz |
| Paper Weight | 52 – 256 g/m² |
