Using SP Mode
D115/D116 5-8 SM
To scroll through the menus, press the or keys [A].
To view the firmware version, press the right key. "ROM" is the information on the
current firmware. "NEW" is the information on the firmware in the SD card.
To return to the menu, press the
key.
To select the module, press the OK key.
To scroll through the module name, the serial number, and the version, press the
key or
key.
If you wish to install the following firmware simultaneously, press the START key. The
scroll keys can be used to confirm that this firmware has been selected (highlighted
with a dark background).
[Engine, FCU, Scanner, Printer, Printer Font, Security Module]
Please note that the following firmware cannot be updated simultaneously.
The update procedure must be repeated for each individually.
System/Copy, ServiceCardNetFile, ServiceCardNIB, ServiceCardFAX,
ServiceCardWebSystem.
When you have selected a module, the text lines are highlighted, and the "Verify" key
and the "Update" key are displayed.
8. Select a module and press the "Update" key.
To Next Page
Loading...
