System Service Mode
SM Appendix 3-29 D115/D116
Appendix:
SP Mode
Tables
5401
Access Control
When installing the SDK application, SAS (VAS) adjusts the following
settings. DFU
103 DocAcl CTL
104 Authentication Time CTL
[ 0 to 255 / 0 / 1 /step]
162 Extend Certification CTL
Selects the log out type for the
extend authentication device.
Bit 0: Log-out without an IC card.
0: Not allowed (default)
1: Allowed
200 SDK1 Unique ID CTL
"SDK" is the "software
development kit". This data can be
converted from SAS (VAS) when
installed or uninstalled. (DFU)
201 SDK1 Certification Method CTL
210 SDK2 Unique ID CTL
211 SDK2 Certification Method CTL
220 SDK3 Unique ID CTL
221 SDK3 Certification Method CTL
230 SDK Cert CTL
240 Detail Option CTL
Enables or disables the log-out
confirmation option.
Bit0: Log-out confirmation option
0: Enable (default), 1: Disable
Selects the automatic log-out time.
Bit1 and 2: Automatic log-out timer
reduction
00: 60 seconds (default), 01:10
seconds, 10: 20seconds, 11: 30
seconds
To Next Page
Loading...
