System Service Mode
SM Appendix 3-69 D115/D116
Appendix:
SP Mode
Tables
062 Compl Opt1
(1)
Use this SP to set the conditions for password
entry to access the local address book.
Specifically, this SP limits the password entry to
upper case and sets the length of the password.
[0 to 32 / 0 / 1 /step]
063 Compl Opt2
(1)
Use this SP to set the conditions for password
entry to access the local address book.
Specifically, this SP limits the password entry to
lower case and defines the length of the
password.
[0 to 32 / 0 / 1 /step]
064 Compl Opt3
(1)
Use this SP to set the conditions for password
entry to access the local address book.
Specifically, this SP limits the password entry to
numbers and defines the length of the password.
[0 to 32 / 0 / 1 /step]
065 Compl Opt4
(1)
Use this SP to set the conditions for password
entry to access the local address book.
Specifically, this SP limits the password entry to
symbols and defines the length of the password.
[0 to 32 / 0 / 1 /step]
091 FTP Auth Port Setting
Specifies the FTP port for getting a distribution
server address book that is used in the
identification mode.
[0 to 65535 / 3671 / 1 /step]
094 Encryption Stat
Shows the status of the encryption function for
the address book data.
Note
(1)
:
SP5846-062 to SP5846-065 do not normally require adjustment.
These SP modes are enabled only after the system administrator has set up a group password
policy to control access to the address book.
To Next Page
Loading...
