System Service Mode
D115/D116 3-74 SM Appendix
5858
Debug Log Save: SC CTL -
These SPs select the content of the debugging information to be saved to the
destination selected by SP5857-2.
SP5858-3 stores one SC specified by number. Refer to the chapter "Trouble
Shooting" for a list of SC error codes.
001 Engine SC
Turns the save function on/off for SC codes
generated by copier engine errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
002 Controller SC
Turns the save function on/off for SC codes
generated by GW controller errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
003 Any SC
[0 to 65535 / 0 / 1 /step]
004 Jam
Turns the save function on/off for jam errors.
[0 or 1 / 0 / 1/ step]
0: OFF, 1: ON
5859
Debug Log Save Key CTL -
001 Key 1
These SPs allow you to set up to 10 keys for log
files for functions that use common memory on the
controller board.
[ –9999999 to 9999999 / 0 / – ]
002 Key 2
003 Key 3
004 Key 4
005 Key 5
006 Key 6
007 Key 7
008 Key 8
009 Key 9
To Next Page
Loading...
