System Service Mode
SM Appendix 3-89 D115/D116
Appendix:
SP Mode
Tables
7803*
PM Counter
001 Paper Displays the PM counter.
7804
PM Count Reset
001
Paper
Resets the PM counter (SP7-803-001). When the program ends normally, the
message "Completed" is displayed.
7807
Reset–SC/Jam
001
Resets the SC, paper, original, and total jam counters. When the program
ends normally, the message "Completed" is displayed. SP7-807-1 does not
reset the following logs: SP7-507 (Display-Paper Jam History) and SP7-508
(Display-Original Jam History).
7826
MF Error Counter Japan Only
Displays the number of counts requested of the card/key counter.
001 Error Total
A request for the count total failed at power on. This
error will occur if the device is installed but
disconnected.
002 Error Staple
The request for a staple count failed at power on.
This error will occur if the device is installed but
disconnected.
7827
MF Error Counter Clear
Press Execute to reset to 0 the values of SP7826. Japan Only
To Next Page
Loading...
