System Service Mode
SM Appendix 3-97 D115/D116
Appendix:
SP Mode
Tables
8 221
ADF Org Feeds CTL
[0 to 99999999 / 0 / 1]
These SPs count the number of pages fed through the ADF for front and
back side scanning.
001 Front
Number of front sides fed for scanning:
With an ADF/ARDF that can scan both sides
simultaneously, the Front side count is the same as the
number of pages fed for either simplex or duplex scanning.
With an ADF/ARDF that cannot scan both sides
simultaneously, the Front side count is the same as the
number of pages fed for duplex front side scanning. (The
front side is determined by which side the user loads face
up.)
002 Back
Number of rear sides fed for scanning:
With an ADF/ARDF that can scan both sides
simultaneously, the Back count is the same as the number
of pages fed for duplex scanning.
With an ADF/ARDF that cannot scan both sides
simultaneously, the Back count is the same as the number
of pages fed for duplex rear-side scanning.
When 1 sheet is fed for duplex scanning the Front count is 1 and the Back count is 1.
If a jam occurs during the job, recovery processing is not counted to avoid double counting.
Also, the pages are not counted if the jam occurs before the first sheet is output.
8 281
T:Scan PGS/TWAIN CTL These SPs count the number of
pages scanned using a TWAIN
driver. These counters reveal how
the TWAIN driver is used for delivery
functions.
[0 to 99999999 / 0 / 1]
At the present time, these
counters perform identical
counts.
8 285
S:Scan PGS/TWAIN CTL
To Next Page
Loading...
