Bit Switches
SM Appendix 5-25 D115/D116
Appendix:
Fax Service
Program
11: Reserved
A mail requesting a Return Receipt sent from an IFAX with this switch set to “00”
(for “dispatched”) received by Microsoft Outlook 2000 may cause an error. If any
setting other than “displayed” (01) causes a problem, change the setting to “01” to
enable normal sending of the Return Receipt.
4
Media accept feature
This setting adds or does not add the media accept feature to the answer mail to
confirm a reception.
0: Does not add the media accept feature to the answer mail
1: Adds the media accept feature to the answer mail.
Use this bit switch if a problem occurs when the machine receives an answer mail,
which contains the media accept feature field.
5-6
Not Used
7
Image Resolution of RX Text Mail
This setting determines the image resolution of the received mail.
0: 200 x 200
1: 400 x 400
The “1” setting requires installation of the Function Upgrade Card in order to have
enough SAF (Store and Forward) memory to receive images at 400 x 400
resolution.
I-fax Switch 03 - Not used (do not change the settings) [ SP No. 1-102-004]
To Next Page
Loading...
