Copier
SM 2-7 D115/D116
Installation
4. Remove the three scanner lock pins. (A tag is hanging from each pin.) To remove: Grasp
the base of the pin [C], turn the pin 90 degrees, and pull it down and out.
5. Remove the tags from the pins.
6. Break each pin off the base [C].
7. Discard the pin part [D].
8. Set each base [C] back into its original hole, turning it 90° to lock it into place. (Be sure to
do this for all three pins.)
9. Open the front door [E].
10. Lift lever [F], press in on latch [G] and pull the bottle holder [H] out. (You do not need to pull
it completely out of the machine.)
11. Take a new bottle of toner, and shake it several times.
To Next Page
Loading...
