Copier
SM 2-13 D115/D116
Installation
Installation Procedure
1. Attach the handset bracket [A] (
x 2)
2. Remove the label from the handset cradle [B].
3. Attach the cradle [B] to the handset bracket (
x 2).
4. Attach the cradle to the bracket (
x 2).
5. Reattach the label.
The bracket is an accessory of the copier.
6. Set the handset on the cradle.
7. Connect the handset cable to the "TEL" jack and set the telephone cable [A] as shown
above.
To Next Page
Loading...
