Paper Tray Unit (D567)
SM 2-15 D115/D116
Installation
3. Set the machine on the paper tray unit.
When installing a second paper tray unit, place on the first paper tray unit before
placing the copier onto the pair pf paper tray units
4. Remove the paper(s) tray from the paper tray unit(s).
5. Load paper into the paper tray(s). Adjust the side and end fences as necessary. If loading
8
1
/
2
"x 14" paper, remove the end fence and set it into the special compartment.
6. Set the paper tray(s) back into the paper tray unit(s).
7. Stick on the appropriate tray-number decal(s) and paper-size decal(s), at the locations
indicated in the illustration.
To Next Page
Loading...
