USB 2.0/SD Slot Type B
D115/D116 2-26 SM
Smooth the hole in the upper left cover.
10. Attach the upper left cover [A] to the mainframe.
11. Attach the rear cover.
12. Attach the cable clamp [A] to the upper left cover (
x 1) as shown above.
13. Connect the USB cable [A] to USB-A.
14. Attach the interface cover.
15. Plug in and turn on the main machine.
16. Enter the SP mode, and then change the setting of SP1013-001 from “0” to “1”.
To Next Page
Loading...
