SP Mode Service Tables
SM 5-47 J012/J013/J014
Service
Tables
1005 REG:TR1:GLOS:F Adjust Main Scan Registration (Glossy Paper: FA)
Use this SP code to adjust writing in the main scan direction for glossy paper
loaded in Tray 1. Do this setting when registration does not match the image
start position on the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
1006 REG:TR2:GLOS:F
Adjust Main Scan Registration (Tray 2: Glossy Paper:
FA)
Use this SP code to adjust writing in the main scan direction for glossy paper
loaded in Tray 2. Do this setting when registration does not match the image
start position on the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
1007 REG:MAN:GLOS:F
Adjust Main Scan Registration (Bypass: Glossy Paper:
FA)
Use this SP code to adjust writing in the main scan direction for glossy paper
loaded in the bypass tray. Do this setting when registration does not match the
image start position on the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
1008 REG:FD:OHP:F Adjust Sub Scan Registration (OHP: FA)
Use this SP code to adjust writing in the sub scan direction for transparencies
(OHP). Do this setting when registration does not match the direction of paper
feed selected in the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
1009 REG:TR1:OHP:F Adjust Main Scan Registration (Tray 1: OHP: FA)
Use this SP code to adjust writing in the main scan direction for transparencies
(OHP) loaded in Tray 1. Do this setting when registration does not match the
image start position on the user image adjustment menu.
[-128 to +127/FA/1/0.1 mm]
To Next Page
Loading...
