Setting Items Values
KCMY
Black
Special
*1
Press [Execute].
*1
Type 2 and Type 4 only
0509 Smooth Fusing Belt
Smooth the Fuser Belt to remove vertical and horizontal lines from the printouts.
Vertical or horizontal lines may appear when printing on paper that is larger than the paper used
immediately before it.
In such case, press [Execute] to cause a roller to press on the fusing belt and prevent vertical and
horizontal lines. Select [Belt Scratches] if vertical or horizontal lines appear on the edges of the paper.
Select [Uneven Gloss: Short Time] if there are patches of uneven glossiness.
Setting Items Selection
Belt Scratches
Uneven Gloss: Short Time
Press [Execute].
0510 Fusing Belt Smoothing Setting
Specify the condition to execute Fuser Belt smoothing.
Setting Items Selection Default Value
Auto Exe: Belt Scratches Normal
Frequently (With
Density Adj)
More Frequently
Most Frequently
Normal
Auto Exe: Uneven Gloss Off
On
On
7. Adjustment Settings for Operators
300
To Next Page
Loading...
