Ricoh SP 3710SF - Page 215

1. Place the original.
If [TX/RX Switch Setting] is set to [TX/RX Auto Setting], you cannot send faxes using the exposure
glass.
2. Press the [Home] key.
DYG322
3. Press the [Fax] icon on the [Home] screen.
4. Press [On Hook].
[On Hook] appears on the screen.
5. Specify the destination using the number keys.
6. If you hear a high pitched tone, press the [Start] key.
DYG336
If [TX/RX Switch Setting] is set to [TX/RX Auto Setting], Step 7 does not apply.
7. If the original is placed on the exposure glass, press [TX], and then press the [Start] key.
• For details about selecting the transmission mode, see page 203 "Selecting Transmission Mode".
• For details about [Fax No. Confirmation], see page 271 "Administrator Tools Settings (When
Using the Touch Panel Model)".
Sending a Fax
213