Sending a fax after a conversation
An external telephone allows you to send a fax after finishing your conversation without having to
disconnect and redial. This function is useful when you want to ensure that the fax has been received.
1. Place the original.
If [TX/RX Switch Setting] is set to [TX/RX Auto Setting], you cannot send faxes using the exposure
glass.
2. Press the [Home] key.
3. Press the [Fax] icon on the [Home] screen.
4. Pick up the handset of the external telephone.
5. Specify the destination using the external telephone.
6. When the other party answers, tell the receiver that you want to send them a fax
document (ask them to switch to facsimile mode).
7. If you hear a high pitched tone, press the [Start] key.
If [TX/RX Switch Setting] is set to [TX/RX Auto Setting], Step 8 does not apply.
8. If the original is placed on the exposure glass, press [TX], and then press the [Start] key.
9. Replace the handset.
6. Sending and Receiving a Fax
214
To Next Page
Loading...
