In this mode, you must answer calls with an external telephone. If a call is a fax call, you must
start the fax reception manually. For details, see page 225 "Receiving a fax in FAX/TEL
Manual mode".
Configuring the reception mode
1. Press the [Home] key.
2. Press the [Setting] icon on the [Home] screen.
3. Press [Fax Features].
4. Press [Reception Settings].
5. Press [Switch Recep. Mode].
6. Select the desired reception mode.
7. Press the [Home] key.
• In FAX/TAD mode, the machine automatically starts to receive faxes after the external
telephone answering device rings the number of times specified in [No. of Rings (TAD)] under
[Fax Features]. Make sure to set the external telephone answering device to answer calls
before the machine starts to receive faxes. For [No. of Rings (TAD)], see page 247 "Fax
Features Settings (When Using the Touch Panel Model)".
• An external telephone is required to use this machine as a telephone. For details about
connecting an external telephone to the machine, see Setup Guide.
Receiving a fax in FAX/TEL Manual mode
• To receive faxes, be sure to first remove any originals loaded in the ADF.
The procedure differs depending on whether [TX/RX Switch Setting] is set to [TX/RX Auto Setting] or
[TX/RX Manual Setting] in [Fax Features].
Receiving a Fax
225
To Next Page
Loading...
