Message Causes Solutions
Connection Failed The line could not be connected
correctly.
• Confirm that the telephone line is
properly connected to the machine.
• Disconnect the telephone line from
the machine, and connect a standard
telephone in its place. Confirm that
you can make calls using the
telephone. If you cannot make calls
this way, contact your telephone
company.
Cover open A cover is open. Close the cover completely.
Dial Failed The fax could not be sent. • Confirm that the fax number you
dialed is correct.
• Confirm that the destination is a fax
machine.
• Confirm that the line is not busy.
• You may need to insert a pause
between dial digits. Press [Redial]
after, for example, the area code.
• When Using the Touch Panel Model
Check that [PSTN / PBX] in
[Administrator Tools] has been
specified in accordance with the
telephone line in use. See page 271
"Administrator Tools Settings (When
Using the Touch Panel Model)".
• When Using the Four-line LCD Panel
Model
Check that [PSTN / PBX] in [Admin.
Tools] has been specified in
accordance with the telephone line in
use. See page 310 "Administrator
Tools Settings (When Using the Four-
line LCD Panel Model)".
Error and Status Messages on the Screen
393
To Next Page
Loading...
