Ricoh SP 3710SF - Page 398

Message Causes Solutions
Misfeed: Duplex Unit
Remove Paper
This message appears only
when using the touch panel
model.
Paper has been jammed in the
duplex unit.
Remove the jammed paper. See
page 404 "Removing Paper Jams".
Misfeed: Dup. Unit This message appears only
when using the four-line LCD
panel model.
Paper has been jammed in the
duplex unit.
Remove the jammed paper. See
page 404 "Removing Paper Jams".
Misfeed: BypassTray Paper has been jammed in the
bypass tray.
Remove the jammed paper. See
page 404 "Removing Paper Jams".
Misfeed: Standard
Tray
This message appears only
when using the touch panel
model.
Paper has been jammed in the
paper exit area.
Remove the jammed paper. See
page 404 "Removing Paper Jams".
Misfeed: Main Tray This message appears only
when using the four-line LCD
panel model.
Paper has been jammed in the
paper exit area.
Remove the jammed paper. See
page 404 "Removing Paper Jams".
Misfeed: Tray 1 Paper has been jammed in the
tray 1 paper input area.
Remove the jammed paper. See
page 404 "Removing Paper Jams".
Misfeed: Tray 2 Paper has been jammed in the
paper tray.
Remove the jammed paper. See
page 404 "Removing Paper Jams".
Net Communication
Error
Connection with the server was
lost while sending or receiving
data.
Contact the network administrator.
Network is not Ready A scanned file could not be sent
because the machine has not
received IP address information
from the DHCP server
completely.
Wait until the machine receives the IP
address information completely, and then
try the operation again.
10. Troubleshooting
396