When using the touch panel model
1. Check that the router (access point) is working correctly.
2. Open the PIN code configuration window (web page) for the router (access point) on
your computer.
3. Make sure the wireless LAN option is attached to the machine and the wireless (Wi-
Fi) connection is enabled.
4. Press the [Home] key.
5. Press the Wireless (Wi-Fi) icon on the [Home] screen.
6. If you are requested to enter a password, enter the password using the number
keys, and then press [OK].
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools
Lock] under [Administrator Tools] menu.
7. Press [Wireless (Wi-Fi) Sett.].
8. Press [WPS].
9. Press [PIN].
10. Check the PIN code.
Write down the PIN code in case you might forget it.
11. Enter the machine’s PIN code (8 digits) on the router (access point)’s web page. (The
web page accessed in Step 2)
12. Execute WPS (PIN system) from the router (access point)’s web page.
13. Press [Connect] on the control panel.
"Please wait for 2 minutes" and connecting with PIN method starts.
14. Check the result.
• Connection has succeeded:
"Connected to access point." is displayed.
11. Configuring Network Settings Using OS X
454
To Next Page
Loading...
