Press [OK] to return to the screen displayed in Step 9, and then press the [Home] key to
return to the initial screen.
• Connection has failed:
"Failed to connect to access point." is displayed.
Press [OK] to return to the screen displayed in Step 9. Check the configuration for the
router (access point), then try the connection again.
15. Configuring the Wi-Fi settings is complete.
When using the four-line LCD panel model
1. Check that the router (access point) is working correctly.
2. Open the PIN code configuration window (web page) for the router (access point) on
your computer.
3. Make sure the wireless LAN option is attached to the machine and the wireless (Wi-
Fi) connection is enabled.
4. Press the [User Tools] key.
5. Press the [ ] or [ ] key to select [Network Settings], and then press the [OK] key.
6. If you are requested to enter a password, enter the password using the number
keys, and then press the [OK] key.
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools
Lock] under [Admin. Tools] menu.
7. Press the [
] or [ ] key to select [Wireless (Wi-Fi)], and then press the [OK] key.
8. Press the [ ] or [ ] key to select [WPS], and then press the [OK] key.
9. Press the [ ] or [ ] key to select [PIN], and then press the [OK] key.
10. Check the PIN code.
Write down the PIN code in case you might forget it.
11. Enter the machine’s PIN code (8 digits) on the router (access point)’s web page (The
web page accessed in Step 2).
12. Execute WPS (PIN system) from the router (access point)’s web page.
13. Press [Connect].
14. Check the result.
• Connection has succeeded:
"Connection to AP has Succeeded" is displayed.
Press [EXIT] to return to the screen displayed in Step 9, and then press the [User Tools]
key to return to the initial screen.
• Connection has failed:
Connecting the Machine to a Wireless Network
455
To Next Page
Loading...
