1. Press the [Home] key.
2. Press the [Setting] icon on the [Home] screen.
3. Press [Copier Features].
4. Press [ ].
5. Press [Duplex/Combine].
6. Press [ ].
7. Press [Manual 2Sd Scan Mode].
8. Press the [Home] key.
9. Press the [Copier] icon on the [Home] screen.
10. Place the original on the exposure glass front side down and with the top to the rear of
the machine.
Place the originals one by one.
11. Press the [B&W Start] key or [Color Start] key.
A message prompting you to place the original back side down on the exposure glass appears on
the display.
12. Place the original on the exposure glass with the back side faced down and with the top
to the rear of the machine.
13. Press [Start].
Use the same mode (color or black-and-white) for both sides.
When all originals have been scanned, press [Job Finished].
• After you load the original, press the [B&W Start] key or [Color Start] key within the time specified
in [System Reset Timer]. Otherwise, the job is canceled. For details, see page 257 "Administrator
Tools Settings".
• Sort is not available.
4. Copying Originals
120
To Next Page
Loading...
Need help?
General
