Sending a Fax
• It is recommended that you call the receiver and confirm with them when sending important
documents.
Selecting Transmission Mode
The following explains the transmission modes of the fax function and how to select them.
Types of transmission modes
There are two types of transmission:
• Memory transmission
• Immediate transmission
Selecting the transmission mode
Remove the original
quickly from the machine.
Send documents
immediately.
How many fax numbers
does the destination
have?
Which mode has priority?
Multiple
Single
Memory Transmission
Immediate Transmission
Immediate Transmission
Memory Transmission
Description of transmission modes
• Memory transmission
In this mode, the machine scans several originals into memory and sends them all at once. This
is convenient when you are in a hurry and want to remove the document from the machine. In
this mode, you can send a fax to multiple destinations. If the [Auto Redial] under [Transmission
Setting] is enabled, the machine redials the fax destination automatically when the line is busy
or a transmission error occurs. The number of redial attempts is set to two or three in five-
minute intervals, depending on the [Country] setting under [Administrator Tools]. You can
disable [Auto Redial] under [Fax Features]. For details, see page 230 "Fax Features
Settings".
• Immediate transmission
In this mode, the machine scans the original and faxes it simultaneously. This is convenient
when you want to send an original quickly or when you want to check the destination you are
6. Sending and Receiving a Fax
188
To Next Page
Loading...
