• If [Error Notification E-mail] is disabled or the error notification e-mail failed, the machine will print
out an error report.
Forwarding or Storing Faxes in Memory
To prevent unauthorized users from seeing sensitive faxes, you can set the machine to forward received
faxes to a preset destination, or store them in memory without printing them out.
• This function is available for SP C262SFNw only.
• The table below shows what happens after forwarding succeeds or fails depending on the
machine’s configuration.
Forwarding [Print
Forwarded
File]
[Print
Received File]
Results
Success Off Not
applicable
The machine deletes the fax from memory.
Success On On The machine prints out the fax and deletes it
from memory.
Success On Off The machine stores the fax in memory for later
manual printing.
Failure Off Not
applicable
The machine prints out a forwarding failure
report and deletes the fax from memory.
Failure On On The machine prints out a forwarding failure
report, prints out the fax, and then deletes it
from memory.
Failure On Off The machine prints out a forwarding failure
report and stores the fax in memory for later
manual printing.
• If the machine is unable to print out a fax due to machine errors such as an empty paper tray or a
paper jam, the fax will remain in memory and the Fax Received indicator will flash. The remaining
pages will start printing as soon as the problem is resolved.
6. Sending and Receiving a Fax
214
To Next Page
Loading...
Need help?
General
