Basic Operation for TWAIN Scanning
This section describes the basic TWAIN scanning operation.
TWAIN scanning is possible if a TWAIN-compatible application is running on your computer.
1. Your Computer (TWAIN driver already installed)
Instruct the machine to start scanning the original that is set on the machine.
2. This Machine
The original that is set on the machine is scanned, and its data is sent to a client computer.
Using TWAIN scanner
This section describes the preparations for using the TWAIN scanner.
• To use the TWAIN scanner, you must install the TWAIN driver, which is on the supplied CD-ROM.
• To use the TWAIN scanner, a TWAIN-compliant application must be installed.
To use the machine as a TWAIN scanner, first do the following:
• Install the TWAIN driver.
• Install a TWAIN-compliant application.
TWAIN scanning
TWAIN scanning is possible if your computer is running a TWAIN-compatible application.
The following is a general scan procedure with the TWAIN driver, so the actual operation may differ
depending on the applications you use. For details, see the application's Help.
1. Start a TWAIN-compliant application.
2. Place originals.
5. Scanning Originals
164
To Next Page
Loading...
Need help?
General
