Network Settings
• Depending on the settings you change, the machine might need to be restarted.
• Depending on the model you are using, some items might not appear.
Wi-Fi Enable
Item Description Value
Wi-Fi Enable Select whether to enable or disable
Wireless LAN.
If [Disable] is set, [Wi-Fi
Configuration] and [Wi-Fi Direct
SSID] are not displayed.
• Disable
• Enable
Default: [Disable]
Ethernet
Item Description Value
MAC Address Displays the machine's MAC address. –
Ethernet Speed Displays the current Ethernet speed
setting.
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
• No Ethernet Connection
Appears when a network cable
is not connected.
Set Ethernet
Speed
Specifies the speed for Ethernet
communication. Select a speed that
matches your network environment.
For most networks, the default setting is
the optimum setting.
• Auto Select
• 100Mbps Full Duplex
• 100Mbps Half Duplex
• 10Mbps Full Duplex
• 10Mbps Half Duplex
Default: [Auto Select]
7. Configuring the Machine Using the Control Panel
266
To Next Page
Loading...
