Ricoh SP C260SFNw - Page 269

IPV4 Configuration
Item Description Value
IPV4 DHCP Sets the machine to receive its IPv4
address, subnet mask, and default
gateway address automatically from a
DHCP server.
• Inactive
• Active
Default: [Active]
IP Address Specifies the machine's IPv4 address
when DHCP is not used.
Use this menu to check the current IP
address when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
Subnet Mask Specifies the machine's subnet mask
when DHCP is not used.
Use this menu to check the current
subnet mask when DHCP is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
Gateway
Address
Specifies the machine's default
gateway address when DHCP is not
used.
Use this menu to check the current
default gateway address when DHCP
is used.
Default: XXX.XXX.XXX.XXX
The numbers represented by "X" vary
according to your network
environment.
IP Address
Method
Displays the IP address acquisition
method.
• IP not Ready
• DHCP
• Manual Configuration
• Default IP
Wi-Fi Direct IP
Addr
Displays the IP address of Wi-Fi Direct. –
IPV6 Configuration
Item Description Value
IPV6 Select whether to enable or disable
IPv6.
• Inactive
• Active
Default: [Inactive]
Network Settings
267