Ricoh SP C260SFNw - 2 Paper Specifications and Adding Paper; Workflow for Loading Paper and Configuring Paper Sizes and Types

2. Paper Specifications and Adding
Paper
This chapter describes how to load paper and originals and about their specifications.
Workflow for Loading Paper and Configuring
Paper Sizes and Types
This section explains how to load paper and operations required after paper is loaded.
After following the procedures below, you can copy or print on the paper that is loaded in the machine.
Load paper into the paper tray.
Specify the paper type and size.
Specify the paper type and size on the printer driver.
For details about the procedures, refer to the next page.
Procedure Reference
See page 50 "Loading Paper".
There are two ways to specify the paper type and size.
• When using the control panel
See page 59 "Specifying Paper Type and Paper Size Using the
Control Panel".
• When using Web Image Monitor
See page 62 "Specifying Paper Type and Paper Size Using Web
Image Monitor".
See page 63 "Specifying Paper Type and Paper Size Using the Printer
Driver".
For details about supported paper, see page 65 "Supported Paper".
49