5. Place the original on the exposure glass or in the ADF.
To place the original, see page 79 "Placing Originals".
Specify the scanning settings as necessary. For details of specifying the scanning settings, see
page 172 "Specifying Scan Settings for Scanning".
6. Press the [B&W Start] key or [Color Start] key.
To scan in black and white, press the [B&W Start] key.
To scan in color, press the [Color Start] key.
Depending on the machine's setting, you will see the following screen on the display.
• When in halftone black-and-white scanning mode:
• When in color or gray scale black-and-white scanning mode:
Basic Procedures for Saving Scan Files on a USB Flash Memory Device
157
To Next Page
Loading...
