Canceling a Transmission While the Original Is Being Scanned
Use this procedure to cancel scanning or transmitting of the original while it is being scanned.
1. Press the [Clear/Stop] key.
2.
Press [Fax Job] on the [Cancel Jobs] screen.
Canceling a Transmission After the Original Is Scanned (While a Transmission Is in
Progress)
Use this procedure to delete a file that is being sent after the original is scanned.
1. Press the [Clear/Stop] key while "Transmitting..." is displayed on the display.
2. Press [Fax Job] on the [Cancel Jobs] screen.
• If you cancel a document while it is being sent, the transmission is halted as soon as you finish the
cancellation procedure. However, some pages of the document may already have been sent and
received at the other end.
• If the transmission finishes while this procedure is being processed, the transmission is not canceled.
Note that the transmission duration is short if an Internet Fax is being executed.
Sending a Fax
193
To Next Page
Loading...
