Ricoh SP C260SFNw - Page 238

Report Print Setting
Item Description Value
Print TX Status Sets the machine to print a transmission
report automatically after a fax
transmission.
When the machine is in Immediate
Transmission mode, the image of the
original will not be reproduced on the
report, even if [Error Only(Image)] or
[Every TX (Image)] is selected.
Note that if a memory error occurs for
LAN-Fax transmission, a transmission
report will always be printed
regardless of this setting.
The transmission report will be printed
on A4 or Letter size paper.
• Error Only
Prints a report when a
transmission error occurs.
• Error Only(Image)
Prints a report with an image of
the original when transmission
error occurs.
• Every TX
Prints a report for every fax
transmission.
• Every TX (Image)
Prints a report with an image of
the original for every fax
transmission.
• Do not Print
Default: [Every TX (Image)]
Print Fax
Journal
Sets the machine to print a fax journal
automatically for every 50 fax jobs
(both sent and received).
The fax journal will be printed using
the tray set for [Facsimile] under
[Paper Tray Priority] in [Paper
Settings], on A4 or Letter size paper.
• Auto Print
• Do not Auto Print
Default: [Auto Print]
7. Configuring the Machine Using the Control Panel
236