Ricoh SP C260SFNw - Page 243

Item Description Value
Alarm Volume Specifies the volume of the alarm that
sounds when an operation error
occurs.
• Off
• Low
• Middle
• High
Default: [Middle]
I/O Timeout
Item Description Value
USB Specifies how many seconds the
machine waits for print data, if the
data is interrupted while it is being sent
from the computer via USB. If the
machine does not receive any more
data within the time specified here, the
machine only prints the data it has
received. If printing is frequently
interrupted by data from other ports,
increase the timeout period.
• 15 sec.
• 60 sec.
• 300 sec.
Default: [60 sec.]
Network Specifies how many seconds the
machine waits for print data, if the
data is interrupted while it is being sent
from the computer via network. If the
machine does not receive any more
data within the time specified here, the
machine only prints the data it has
received. If printing is frequently
interrupted by data from other ports,
increase the timeout period.
• 15 sec.
• 60 sec.
• 300 sec.
Default: [60 sec.]
System Settings
241