Ricoh SP C260SFNw - Page 264

Item Description Value
Reset Settings Be sure not to clear the
settings by mistake.
• Reset All Settings
Resets the machine's settings to their defaults
except the following:
• Language settings
• Country settings
• Network settings
• Fax destinations
Press [Yes] to execute. Press [No] to exit to the
previous level of the menu tree without
clearing the settings.
• Reset Network Sett.
Resets the network settings to their defaults.
Press [Yes] to execute. Press [No] to exit to the
previous level of the menu tree without
clearing the settings.
• Clear Address Book
Clears the fax Quick Dial/Speed Dial
destinations.
Press [Yes] to execute. Press [No] to exit to the
previous level of the menu tree without
clearing the destinations.
PCL6 Mode Set this to [Universal] when
using the Universal Driver
and to [SP C262] when
using the normal driver.
• Universal
• SP C262
Default: [SP C262]
Admin. Tools
Lock
Specifies a four-digit
password for accessing the
[Address Book], [Network
Settings], [Setup Wizard],
and [Administrator Tools]
menus.
Do not forget this password.
• On (0000 to 9999)
• Off
Default: [Off]
7. Configuring the Machine Using the Control Panel
262