2. Press the [Home] key.
3. Press the [Setting] icon on the [Home] screen.
4. Press [Network Settings].
5. If you are requested to enter a password, enter the password using the number
keys, and then press [OK].
A password for accessing the [Network Settings] menu can be specified in [Admin. Tools
Lock] under [Administrator Tools] menu.
6. Press [Wi-Fi Enable].
7. Press [Enable].
8. Turn off the machine, and then turn it back on.
9. Press the wireless LAN icon.
10. Press [Setup Wizard].
11. If you are requested to enter a password, enter the password using the number
keys, and then press the [OK].
A password for accessing the [Wi-Fi Configuration] menu can be specified in [Admin. Tools
Lock] under [Administrator Tools] menu.
12. Press the SSID of the router (access point) from the searched SSID list.
13. Enter the encryption key using the number keys, and then press the [Connect].
As the passphrase, you can enter either 8 to 63 ASCII characters (0x20-0x7e) or 64
hexadecimal digits (0-9, A-F, a-f).
14. Check the result.
• Connection has succeeded:
Configuring the Wi-Fi settings is complete.
• Connection has failed:
Check the configuration for the router (access point), and then try the connection again.
Connecting the Machine to a Wireless Network
399
To Next Page
Loading...
