Rievtech PR-6DC-DA-R - Page 379

379
Input parameters:
Input No
14 ( I1-IE )
14 (I1-IE )
Digital input
14 ( I1-IE )
14 (I1-IE )
12(I1-I4) +(I6-IE)
Analogue input
None
6 ( I1-I4)(0..10V DC)
2(I5-I6)(0...20mA)+
4(I1-I4)(0...10V)
Input voltage
AC0-240V
DC 0-28.8V
DC 0-28.8V(I3-IE)
Input signal0
AC0-40V；<0.03mA
< 5V
DC;<0.1mA(I1-I6),<1m
A(I7-IC)
< 5V
DC;<0.1mA(I3-I6),<1m
A(I7-IC)
Input signal1
AC79-240V；
>0.06mA
> 8 V
DC;>0.3mA(I1-I6),>1.7
mA(I7-IC)
> 8 V
DC;>0.3mA(I3-I6),>1.7
mA(I7-IC)
Input current
---
0.4mA(I1-I6),2.3mA(I7-I
C),@ 10.8V dc
0.5mA(I1-I6),2.6mA(I7-I
C),@ 12.0 V dc
1.2mA(I1-I6),5.2mA(I7-I
C),@ 24 V dc
1.5mA(I1-I6),6.3mA(I7-I
C),@ 28.8 V dc
0.4mA(I3-I6),2.3mA(I7-I
C),@ 10.8V dc
0.5mA(I3-I6),2.6mA(I7-I
C),@ 12.0 V dc
1.2mA(I3-I6),5.2mA(I7-I
C),@ 24 V dc
1.5mA(I3-I6),6.3mA(I7-I
C),@ 28.8 V dc
Input Response Time
Delay time at 0 to 1：
120V AC ：Typ. 50 ms
240V AC ：Typ. 30 ms
Delay time at 1 to 0：
120V AC ：Typ. 90 ms
240V AC ：Typ.100 ms
Delay time at 0 to 1 ：
Typ. 1.5 ms
(I1-I6),<1ms(I7-IC)；
Delay time at 1 to 0 ：
Typ. 1.5
ms(I1-I6),<1ms(I7-IC)；
Delay time at 0 to 1 ：
Typ. 1.5 ms
(I3-I6),<1ms(I7-IC)；
Delay time at 1 to 0 ：
Typ. 1.5
ms(I3-I6),<1ms(I7-IC)
Maximum counting
frequency
Typ. 4Hz
Typ.：4 HZ
Sensor type
Contact or 3-wire PNP
Contact or 3-wire PNP
Isolation between power
supply and inputs
None
Resistive
Isolation between inputs
None
None
Protection against polarity
inversions
Yes
None
Inputs used as analog inputs( I1/I3-I6 )
Measurement range
---
DC 0---10V
Input impedance
---
Min, 24KΩ ; Max. 72KΩ
Input voltage
---
28.8 V DC max
Resolution
---
10bit ,0.01V
Accuracy at 25 °C
---
± (Max.0.02)V
Accuracy at 55 °C
---
± (Max.0.04)V
Isolation between analog
channel and power supply
---
None