Rigol DP2000 Series - Analyzer; Common Analysis; Figure 10.1 Analyzer Main Interface

To Next Page

To Previous Page

Analyzer

DP2000 series power supply provides the Analyzer function for you to analyze the

quality of output signals. Available analysis functions for the 3 channels include

common analysis, pulse current analysis (only for CH1 and CH2), and data logging.

You can press the front-panel

or tap > Analyzer to access the Analyzer

main interface, as shown in the figure below. The label at the upper-left of the

interface indicates the currently selected analysis function (common analysis/pulse

current analysis). The four function keys at the right side allow you to easily configure

the Analyzer settings, execute analysis, print screen, and control labels.

Figure 10.1 Analyzer Main Interface

10.1 Common Analysis

In the Analyzer main interface, tap QicSet to access the quick setup interface. Then

tap Common to enter the common analysis setting interface, as shown in the figure

below. In this interface, you can select the object to analyze and statistical method.

Analyzer

DP2000 User Guide

Other manuals for Rigol DP2000 Series