NOTE
GPIB and RS232 share a physical port. Those two interfaces cannot be used concurrently.
13.4 Option Settings
This series power supply provides multiple options to fulfill your measurement
requirements. If you need any of these options, please order the option according to
the Order No. available in
Appendix A: Accessories and Options
, and then install it by
referring to this section. Besides, you can also view the options currently installed on
the instrument or activate the newly purchased option.
View the Installed Option
Press > Option or tap > Utility > Option to enter the interface as shown
in the figure below. You can view the installation information of all options in the
interface.
Figure 13.14 Option Settings Interface
Install the option
The option license is a string of fixed characters. The option file should be in specific
format, with the file extension “.lic”. After you purchase an option, you will obtain a
key (used for obtaining the desired option license). Please install the option following
the steps below.
1. Obtain an option license
Utility
DP2000 User Guide
80
Copyright ©RIGOL TECHNOLOGIES CO., LTD. All rights reserved.
To Next Page
Loading...
Need help?
General
