Wrist Camera Instruction Manual
l The Camera needs to be properly secured before operating the robot.
l Do not install or operate a Camera that is damaged or lacking parts.
l Never supply the Camera with an alternative current.
l Make sure all cord sets are always secured at both ends, at the Camera and at the robot.
l Always respect the recommended keying for electrical connections.
l Be sure no one is in the robot and/or Camera path before initializing the robot's routine.
l Always respect the Camera payload.
l All local safety measures and/or laws on robot operation must be applied to the Vision System.
l
Avoid looking straight at the LEDs when they are turned on as this may cause dazzlement.
Any use of the Vision System in noncompliance with these warnings is inappropriate and may cause injury
ordamage.
©Robotiq inc. 2016-2018
11
To Next Page
Loading...
