Wrist Camera Instruction Manual
2.2. Intended Use
The Vision System is designed to locate objects laying flat on the defined workspace. The system can identify and locate
multiple kind of objects, each object will require its own object teaching process as explained in the Object Teaching
section. The Vision System gets the object's position (x, y) and orientation along the z axis. It allows to operate the robot
according to the object location.
Tip
The Guidelines on Snapshot Position section will give you advice on what workspace should be used or avoided.
Section 5 will give you advice on what objects can be located or not along with background recommendations.
Caution
The Vision System is NOT intended for:
l Metrology
l Bar-code / QR code reading
Note
Always comply with local and/or national laws, regulations and directives on automation safety and general
machine safety.
The unit may be used only within the range of its technical specifications. Any other use of the product is deemed improper
and unintended use. Robotiq will not be liable for any damages resulting from any improper or unintended use.
©Robotiq inc. 2016-2018
12
To Next Page
Loading...
