Roche cobas pulse

107Frequently performed tasks
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
Putting the instrument into standby mode
When the instrument is not in the charging station and
not in use, standby mode can be activated.
In standby mode the instrument is inactive, and saving
power as it is not processing or making measurements.
Automatic activation of standby mode is set by the
Standby timeout configuration item. If enabled it
determines the length of time (seconds) an instrument
must be inactive before standby mode is activated. The
default value is 300 seconds (maximum 3,600 seconds).
Otherwise the instrument can be put into standby mode
using the on/off button.
r To put the instrument into standby
mode
1 Press the on/off button firmly.
I
The instrument vibrates.
f The instrument goes into standby mode.
4 Frequently performed tasks