Roche cobas pulse User Manual

161Non-routine operation
Roche Diagnostics
cobas
®
pulse · Software version 01.03 · User Assistance · Publication version 1.0
r To add a QC lot to the instrument
1 In the Glucose app, tap > Lot management.
2 In the Lot management screen, tap the QC lots tab.
Lot management
Test strip lots QC lots
Lot No. Type Expiry date
GLU
GLU
GLU
GLU
QC level 1
QC level 2
Linearity
QC level 1
Add QC lot
3 On the QC lots tab, tap the Add QC lot button.
4 Using the Scan bottle barcode screen, scan the
barcode on a bottle from the new lot.
f If you are adding a new linearity lot, the new lot is
added to the QC lots tab and a confirmation
message is displayed.
f If you are adding a new QC lot, the Set lot as
\'current\' dialog box is displayed.
5 To add the new QC lot, do one of the following:
• To add the new QC lot and set it as the current lot,
tap the Confirm button.
• To add the new QC lot but not set it as the current
lot, tap the Cancel button.
f The new QC lot is added to the QC lots tab.
Reviewing QC lots on the instrument
You can review the QC and linearity lots on the
instrument, as well as the details of an individual lot.
The following information is available when reviewing an
individual QC lot:
• Lot No.
• Expiry date
• QC version
• Type
• Default target range
• Hospital-defined target range
• Current lot
The following information is available when reviewing an
individual linearity lot:
• Lot No.
• Expiry date
• Linearity version
• Type
c
As required
6 Non-routine operation

Roche cobas pulse Specifications

General

Brand	Roche
Model	cobas pulse
Category	Medical Equipment
Language	English